User Manual

RND 305-00019
2
ENGLISH
Introduction
The RND 305-00019 is a Switch Mode Ba ery Charger with MCU controlled charging. Maximum charge is
achieved through 4 stage charging (Precondition, Bulk, Absorption and Float charge stages). This
charger is suitable for 5AH-120AH 12V lead acid ba eries including GEL and AGM. Another excellent
feature is a sealed splash and dust proof IP-55 rated polycarbonate casing.
!Please read this manual carefully and follow the instructions!
Features
1. 4 Stage Smart Ba ery Charger.
A. Pre charge – Ba ery analysis.
B. Bulk - Constant Current charge.
C. Absorption – Constant Voltage Pulse charge.
D. Float – Maintenance charge.
2. Motorcycle, Car, and Low Temperature (< 10°C) charge modes.
3. Easy one bu on charge selection.
4. Can be permanently connected to the ba ery.
5. Electronic Output short circuit and reverse polarity protection.
6. Splash and dust proof IP-55 construction with poly-carbonate casing.
7. Over-Temperature Protection.
8. Smart ba ery charging is achieved with internal Microcomputer Unit (MCU). Condition of the
ba ery is analyzed before charging starts and is monitored constantly during charging.
Contents
• Smart Charger with lead connector
• Detachable leads with protection cover & crocodile clips
• Detachable leads with protection cover & ring terminals