User Manual

4 5
Operations:
1. Connect the charger system to a wall receptacle strongly. The baery
charger must only be plugged into an earthed socket-outlet.
2. Connect the alligator clips to baery terminals(red clip positive
terminal; black clip negative terminal)
3. Turn on the power switch which is located on the rear panel then the red
LED lits and bi-colour LED will conrm the charger’s stage. And the LCD
(or digital meter) will conrm the charger’s stage & baery level
(or O/P voltage)
Charging Curve & LED Indications:
Notices:
1. Designed for charging Lead-Acid baeries only. Against re-charging
non-rechargeable baeries.
2. If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
3. Always place the charger in well ventilated and dry environments.
4. The baery may be damaged if LED cannot change to green aer long
time charge.
5.
Temperature of the housing can become hot to touch when charging.
Please take care when handling
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com