Datasheet

4. Electrical Characteristics
Unless otherwise stated, all measurements are to be performed at a
Standard Environment of 23 ± 2°C
55 ± 25% RH.
All samples are normalized for 8 hours at least at the above environment prior to measurement.
The digital voltmeter (DCM) is with the precision of 1mV (internal resistance not less than 1 Megohm).
The load resistance of the total circuit is accurate within ±0.5% of the specified value.
4.1 Open circuit voltage and closed circuit voltage (Load resistance 50Ω, 0.1~0.5S)
/
OCV(V) CCV(V)
Initial
＞1.70 ＞1.65
Stored 1 year
＞1.70 ＞1.65
4.2 Service output
Load
1.5w/0.65w 1000mW
Test mode
2s/28s
5m/h
24h/d
4m/15m
8h/d
End voltage
1.05V 1.0V
Unit pulse min
Applications
Digital still camera High intensity
Initial
Normal
600 220
MAD
510 200
Stored 1 year
Normal
570 215
MAD
500 195
m: minute h: hour d: day
Remark: 1) The initial discharge test shall commence within 30 days of manufacture. During stored period, the cells
shall be stored under 20±2℃, RH 55±20% conditions.
2) - The batteries shall not leak during the service life test before the end voltage reached.
3) MAD：minimum average duration--our guarantee discharge value.
4)Normal：normal data, it's our normal daily value, battereis dicharge value are on this as base to be upper or
lower.
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com