Datasheet

Revision date: 27/04/2020 Revision: 2
Distrelec IPA Pre-Saturated Wipes
Protective equipment
Appropriate engineering
controls
Provide adequate ventilation.
Eye/face protection Avoid contact with eyes. Large Spillages: Eyewear complying with an approved standard
should be worn if a risk assessment indicates eye contact is possible.
Hand protection No specific hand protection recommended.
Other skin and body
protection
Appropriate footwear and additional protective clothing complying with an approved standard
should be worn if a risk assessment indicates skin contamination is possible.
Hygiene measures Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product.
Wash contaminated clothing before reuse.
Respiratory protection No specific recommendations. Provide adequate ventilation. Large Spillages: If ventilation is
inadequate, suitable respiratory protection must be worn.
Environmental exposure
controls
Keep container tightly sealed when not in use. Avoid release to the environment.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance Liquid-impregnated wipe.
Colour Colourless.
Odour Characteristic.
Odour threshold Not available.
pH Not available.
Melting point Not available.
Initial boiling point and range Not available.
Flash point Not available.
Evaporation rate Not available.
Evaporation factor Not available.
Flammability (solid, gas) Not available.
Upper/lower flammability or
explosive limits
Not available.
Other flammability Not available.
Vapour pressure Not available.
Vapour density Not available.
Relative density Not available.
Bulk density 0.85 kg/l
Solubility(ies) Miscible with water.
Partition coefficient Not available.
6/
11