Datasheet

Revision date: 24/04/2019 Revision: 2
Distrelec HFO Airduster 400ml Aerosol
Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk
assessment indicates inhalation of contaminants is possible. Ensure all respiratory protective
equipment is suitable for its intended use and is ‘CE’-marked. Check that the respirator fits
tightly and the filter is changed regularly. Gas and combination filter cartridges should comply
with European Standard EN14387. Full face mask respirators with replaceable filter cartridges
should comply with European Standard EN136. Half mask and quarter mask respirators with
replaceable filter cartridges should comply with European Standard EN140.
Environmental exposure
controls
Keep container tightly sealed when not in use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance Aerosol.
Colour Colourless.
Odour Characteristic.
Odour threshold Not available.
pH Not available.
Melting point Not available.
Initial boiling point and range -19°C
Flash point Technically not feasible.
Evaporation rate Not available.
Evaporation factor Not available.
Flammability (solid, gas) Not available.
Upper/lower flammability or
explosive limits
Not available.
Other flammability Not available.
Vapour pressure Not available.
Vapour density Not available.
Relative density Not available.
Bulk density Not available.
Solubility(ies) Not available.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity Not available.
Explosive properties Not available.
Oxidising properties Not available.
9.2. Other information
SECTION 10: Stability and reactivity
10.1. Reactivity
5/
10