Datasheet

SPECIFICATION:
Funcon Protecve lacquer
Delivery Form
Spray
Content 400 ml
Colour
Pale coloured liquid
Acrylic Protective Lacquer
FEATURES:
Transparent acrylic conformal coang
Used for the protecon of electronic circuitry
Spray 400 ml
Formulated for professional use only
Density at 20 °C
0.8 g/ml
VOC Content
75%
Flash Point
-4 °C
Solids Content
15%
Touch dry
10-15 minutes
Recommended Curing Time
24 Hours at 20 °C
DRY FILM COATING:
Colour
Colourless
Operating Temperature Range
-45 °C to +120 °C
Flammability
Self-extinguishing
Dielectric Strenght
40 kV/mm
Surface Insulation Resistance
1 x 10
14
Ω
Moisture Resistance (IPC-CC-830)
Meets approval
Spraying Aerosol: Cleaning the substrate before coating is advised. When applying
RND 605-00135 in aerosol form care must be taken to ensure the can is not shaken
before use. Shaking the can will introduce excessive air bubbles and will give a poor
coating finish.
The can should be held at 45°, and 200mm from the substrate to be coated. The valve
should then be depressed when the can is pointing slightly off target and moved at
about 100mm/s across the target. To ensure the best coating results are achieved try
to use a smooth sweeping motion with small overlap for successive rows.
To ensure penetration of the coating beneath the components and in confined
spaces, spray the assembly from all directions to give an even coating. After
spraying, the boards should be placed in an air-circulating drying cabinet and left to
dry.
Inspection: RND 605-00135 contains a UV trace, which allows inspection of the PCB
after coating to ensure complete and even coverage; the stronger the reflected UV light,
the thicker the coating layer is.
Art. Nr.
RND 605-00135
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com