Datasheet

Revision date: 22/08/2018 Revision: 1
Flux Remover - 400ml aerosol
pH Not available.
Melting point Not available.
Initial boiling point and range Not available.
Flash point Not available.
Evaporation rate 16 (diethyl ether = 1)
Evaporation factor Not available.
Flammability (solid, gas) Not available.
Upper/lower flammability or
explosive limits
Not available.
Other flammability Not available.
Vapour pressure Not available.
Vapour density Not available.
Relative density Not available.
Bulk density 0.78 kg/l
Solubility(ies) Immiscible with water.
Partition coefficient Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity Not available.
Explosive properties Not considered to be explosive.
Oxidising properties Does not meet the criteria for classification as oxidising.
9.2. Other information
SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity See the other subsections of this section for further details.
10.2. Chemical stability
Stability Stable at normal ambient temperatures and when used as recommended. Stable under the
prescribed storage conditions.
10.3. Possibility of hazardous reactions
Possibility of hazardous
reactions
The following materials may react strongly with the product: Oxidising agents.
10.4. Conditions to avoid
Conditions to avoid Avoid exposing aerosol containers to high temperatures or direct sunlight. Pressurised
container: may burst if heated
10.5. Incompatible materials
Materials to avoid No specific material or group of materials is likely to react with the product to produce a
hazardous situation.
10.6. Hazardous decomposition products
8/
18