Datasheet

ManualsBrandsRND Lab ManualsESDESD Workstation Kit with CH Plug

ESD Workstation Kit

ESD Workstation Kit contents

ESD Protected Area Sign Earth Swiss Bonding Plug 3x10mm Stud

• Antistatic coating • Incorporates 3x10mm male stud for connection grounding wire

• Self adhesive: 0.4mm thick PVC • Designed to ﬁt Swiss standard main plug outlets

• 300 x 150mm • Neutral and mains voltage pins are plastic, earth pin is metal

....................................................................................................................................................................................................................

Coiled Earth Lead

• Excellent quality for use with any kind of wrist band

• Strong connection between the cord and 10mm stud

• 10mm Stud / Banana Socket

• Special conductive wire, outer covered with non-conductive PU

• Diameter of cord: 2.4 mm / Diameter of coil cord: 1.02 cm

• Resistivity: 1M Ohm +/- 10%

Fabric Adjustable Wrist Strap Hypo-Allergenic

• Sky blue band

• Adjustable for any size of wrist

• 10mm stud

• High-quality conductive interior, made of stainless steel nylon ﬁlament

• Outer side non-conductive nylon yarn

• Conductive backplate covers the metal part to prevent allergic reaction

• Resistance from Band <10

Ohms Test Method EN 61340-55-1

• Underside of Band <10

Ohms Test Method EN 61340-5-1

• Top Side of Band < 10

Ohms Test Method EN 61340-5-1

Product Code Mat Size (mm) Additional Notes

RND 600-00141 600 x 1200 Each

Straight Earth Lead

• Excellent quality for use with any Field Service Kit or Table Mat

• Strong connection between the cord and stud

• Outer covered with non-conductive PU

• Length: 12ft

• Diameter of cord: 2.4 mm

• Resistivity : 1M Ohm +/- 10%

ESD Mat

• Resistant to chemical agents normally used for maintenance

• Static Dissipative

• Good resistance to heat, scratches and excellent ﬂexibility

and comfort

• Thickness: 2mm

• Surface: Non-shining

RND is a trademark of Distrelec