Datasheet

ESD Workstation Kit

Description

This ESD workstation kit has the equipment needed to

create a static controlled workspace or environment.

Featuring high quality brand products, the kit enables you

to stop any unnecessary damage to delicate electronic

components or devices.

Kit includes:

• 1 x ESD Matting (600x1200mm) with 10mm stud in each corner

• 1 x ESD Protected Area vinyl sign

• 1 x Swiss Plug with 3 x 10mm studs

• 1 x Wristband with 10mm stud

• 1 x Coiled Earth Lead 10-10mm

• 1 x Instruction Leaﬂet

Features

• Reﬂection breaking surface to reduce glare and improve operator comfort

• Prevention of sliding of delicate components thanks to excellent friction coefﬁcient

• Heat resistance: does not melt or burn coming into contact with hot metal parts

or soldering debris

• Suitable for loose laying: does not require application with adhesive

• Good resistance to scratches and excellent ﬂexibility and comfort

Notes

See our range of static gloves for components and devices that are susceptible to surface damage.

Mat

Test Method Result

Material Static dissipative

Thickness 2mm

Surface Non-shining

Tester ETS 406C Static Decay Meter, 3M Model 701 Test Kit for Static Control

Surfaces

Hardness (ISO 7619) 75±5 shore A

Abrasion Resistance (ISO 4649, method A) ≤200mm³

Indentation (EN433) ≤0,20mm

Cigarette Burning Resistance (EN1399) No burn

Chemical Resistance (EN423) Resistant to chemical agents normally used for maintenance

Dimensional Stability (EN424 - 6h/80ºC) ≤0.4%

Surface Resistance Top Layer (EN 100015.1-IEC61340) About 10



Ω

Surface Resistance Bottom Layer (EN 100015.1-IEC61340) About 10



Ω

RND is a trademark of Distrelec

PAGE 1
ESD Workstation Kit Description This ESD workstation kit has the equipment needed to create a static controlled workspace or environment. Featuring high quality brand products, the kit enables you to stop any unnecessary damage to delicate electronic components or devices.
PAGE 2
ESD Workstation Kit ESD Workstation Kit contents ESD Protected Area Sign Earth Swiss Bonding Plug 3x10mm Stud • Antistatic coating • Incorporates 3x10mm male stud for connection grounding wire • Self adhesive: 0.4mm thick PVC • Designed to fit Swiss standard main plug outlets • 300 x 150mm • Neutral and mains voltage pins are plastic, earth pin is metal ..........................................................................................................................................