Datasheet

Disposable Antistatic Coverall
Description Integrity
Result
Test Procedure PGI Standard REF Test Procedure ASTM
Standard
Basis Weight oz/yd 1.5 D3776 D3776
Thickness Mils 6.77 D1777 D1777
Strip Tensile (MD/CD) lbs/in 8.73/6.22 D1682 D1682
Strip Elongation (MD/CD) % 112/107 D1682 D5034
Work to Break in - lbs 20.38/12.13 D1682 D1682
Work up to Fmax. (MD/CD) in - lbs 18.55/10.83 D1682
Tongue Tear (MD/CD) lbs 15.25/9.62 DASTM D2261
Flammability Class 1 CS-191-53, Sec. 1610
Mullen Burst lbs/sq in 83
Particulate Burden none
Shrink Temp F°/C° 270/135
Melt Temp F°/C° 275/135
Water Vapour Transmission gm/24hrs 840 ASTM E96
Tehnical Specifications
ITEM TEST PROCEDURE
PGI STANDARD
REF TEST PROCEDURE ASTM STANDARD
Fabric Weight
g/m
2
GB/T 4669-1995 55
Water Vapour Transmission g/m
2
24hrs
GB/T 12074-1991 1500
Water Resitance Kpa FZ/T 01004-1991 18.8
Flat Abrasion FZ/T 01001-1991 198
Breaking Strength N/5cm GB/T 3923.1-1997 Radial: 70
Woof: 50
Elongation at Break % GB/T 3923.1-1997 Radial: 60
Woof: 50
Tear Strength N/5cm ASTM D2261-1996 Sample cut by horizontal side, normal testing
cannot be done
Woof: 8.6
Electric Charge Density uC/m
2
GB/T 5455-1997 6.5
Flammability GB/T 4744-1997 Melt-down
Chemical Resistance Bleach 5% ASTM T903 Pass
Hydraulic Jack Oil ASTM T903 Pass
Isocyanate Based
Paint Hardener
ASTM T903 Pass
Motor Oil ASTM T903 Pass
Sodium Hydroxide ASTM T903 Pass
Mineral Oil ASTM T903 Pass
Dry Particle Filtration Efficiency No Particle Penetration
Wet Particle Filtration Efficiency No Particle Penetration
Test Results
RND is a trademark of Distrelec