Datasheet

Image shown for

illustration

purposes only

ESD Heel Strap with Hook

and Loop

Features

• Hard wearing heel grounders designed for long term use

• Hook and Loop fastening

• Double layered conductive cup (3.5mm x 230mm)

• Each heel grounder incorporates a 1 Meg Ohm safety resistor

• All Heel Grounders are designed for use in conjunction with ESD flooring or mats

• Recommended to be worn on both feet

• Reusable and can be washed by hand in mild detergents

• Conforms to the requirements of ANSI/ESD S-20.20, EIA 625

Notes: The heel grounder must be tested from time to time using the footwear

test station.

Specification

Details

Outer conductive surface (black)

Inner anti-static surface (grey)

Conductive tab (red)

Overall resistivity

Resistance

1Meg resistor built in

Product Code Description Size Additional notes

RND 600-00098

Heel Grounder with Hook and Loop

One size Each

- 10

Ω

- 10

Ω

- 10

Ω

RND is a trademark of Distrelec

PAGE 1
ESD Heel Strap with Hook and Loop Features • • • • • • • • Image shown for illustration purposes only. Hard wearing heel grounders designed for long term use Hook and Loop fastening Double layered conductive cup (3.5mm x 230mm) Each heel grounder incorporates a 1 Meg Ohm safety resistor All Heel Grounders are designed for use in conjunction with ESD flooring or mats Recommended to be worn on both feet Reusable and can be washed by hand in mild detergents Conforms to the requirements of ANSI/ESD S-20.