Datasheet

Antistatic Stretch Wrap

Description

Pink transparent ﬁlm in rolls with cling layer inside and antistatic agent, making it

suitable for use within an ESD protected area.

Features

• LLDPE stretch ﬁlm for hand application

• High cling performance and tensile strength

Film Properties Value Unit Tolerance Method

Thickness 25 μm ± 1 PLT 01

Density 0.92 g/cm

± 0.003 Theoretic

Tensile Strength At Break

MD 45

N/mm

Minimum value

ASTM D882

TD 23

Yield Strength

MD 8

N/mm

Minimum value

TD 8

Elongation At Break

MD 390

% Minimum value

TD 580

Peel Cling 125 cN ± 15% ASTM D5458

Surface Resistivity >10

<10

Ω - ASTM D257

Pre-stretch

Maximum \\ % -

PLT18

Guaranteed \\ % -

Roll Properties Value Unit Tolerance Method

Width Nominal* mm ± 3 -

Roll Weight Nominal* kg ± 5% -

Core Internal Diameter Nominal* mm ± 1 -

Roll Diameter Nominal* mm ± 5 -

* The nominal value is to be considered equal to the one speciﬁed during the order’s deﬁnition.

The information given here above is the result of our most up to date knowledge and is based on the average values collected

during our productive processes. It is only offered to illustrate the main properties of the product and therefore should not

constitute a guarantee of product suitability to your speciﬁc application.

RND is a trademark of Distrelec

PAGE 1
Antistatic Stretch Wrap Description Pink transparent film in rolls with cling layer inside and antistatic agent, making it suitable for use within an ESD protected area. Features • LLDPE stretch film for hand application • High cling performance and tensile strength Film Properties Value Unit Tolerance Method Thickness 25 μm ±1 PLT 01 Density 0.92 g/cm3 ± 0.
PAGE 2
Antistatic Stretch Wrap Stocking Conditions In order to minimise early material deterioration, we advise storing the product in a dry place away from solar light. For long-term stocking, the recommended temperature is 10-40°C, with humidity levels at 40-80%. The most suitable application temperature is in 15-30°C. Moreover, the film is best if it is used within six months from the production date.