Datasheet

Static Shielding Bag
Test Conclusion: (Date of Issue: 2009-11-10)
The shielding bag is tested accordance with the relevant test standard and requirements.
Test Conditions
The following results were taken under the following environmental test conditions:
Temperature: 23
o
C / Humidity: 12% RH
Technical Parameters:
Item Test Standard Result
Film Thickness Micron Meter 3mils 75 micron
Metal Layer Optical Transmission ASTM D1003 (TOBIAS) 40% +/- 5% optical density
Surface Resistivity STM 11.11 <10
10
Ω/sq
Time for static removal FTMS 101B Method 4046 - 5000-0V <.0.03 Sec
Static Shielding -
Energy Penetration
ESD-STM-11.31 @12% R.H. <20 nJ
Static Shielding -
Capacitive Probe
EIA 541 Appendix E <25V
Friction Static E1A541 Appendix C
Avg.
Triboelectric nanocoulombs
Quartz +0.01 Tefion -0.09
Anti-erosion FTMS 101C Method 3005 No visible spots
Tensile Strength ASTM D882-91, Method A MD 6530 psi TD 5800 psi
Tear Initiation ASTM D1004 -94-Notched MD 2.5 lbs./in TD 2.0 lbs
Puncture Resistance ASTM D3420 >10 psi
Tear Resistance ASTM D882 >8 psi
Burst Strength FTMS 101 C Method 2065.1 50 psi nominal
Heat Seal Temperature - 250 - 375
o
F
Heat Seal Pressure - 30-70 PSI
Heat Seal Strength (D1876-93) Vertrod bar sealer/heat >12 lbs/in width (room temperature)
Breaking Elongation Rate ASTM D882-91 Method A MD 80% TD 85%
Appearance GB/96-04-10
No delamination, burst seal, wrinkle, warp, break, foreign
particle adherence, air bubble beyond sealing <3mm
Test Item Test Method Measured Equipment(s) MDL
Lead (Pb) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg
Cadmium (Cd) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg
Mercury (Hg) IEC 62321:2008 Ed.1 Sec.7 ICP-OES 2mg/kg
Hexavalent Chromium (Cr(VI)) IEC 62321:2008 Ed.1 Annex C UV-Vis 2mg/kg
Polybrominated Biphenyls (PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg
Polybrominated Diphenyl Ethers (PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg
RoHS and REACH Compliance Statement:
All of Antistat’s products are RoHS and Reach compliant.
RND is a trademark of Distrelec