Datasheet

Static Shielding Bag
Description
These open top, easy access static shielding bags are designed to protect
sensitive electronic devices against ESD during transit and whilst kept in
storage.
Features
• Metal “Faraday cage” layer shields products from electric
energy inside and prevents static build-up
• Four layer protection guards against charges inside and out
• Semi transparent for easy content identification
• Surface resistance of 10
8
-10
11
Ω
• Conforms to EIA 625, EIA 541, ANSI/ESD S-20.20 & EN61340-51-ESD
• Custom sizes and print available on request
• Suitable for packing electronic products which are sensitive
to static, eg PCBs, electronic components etc
Construction
Our static shielding bags are constructed in four layers,
consisting of a static dissipative polyester outer layer and a static
dissipative polyethylene inner layer with a centre metallised shield
layer.
Our bags are manufactured from industry approved polyester
and polyethelene laminates. The polyester dielectric works with
the metal layer to provide a Faraday effect, the metal layer
preventing penetration from damaging electrostatic fields.
The specially processed polyethelene keeps tribocharging to a
minimum.
Width
Bag Opening
Bottom Fold or Seal
Length
Configuration(s)
Our bags are available in custom sizes or in several industry
standard sizes. Bags are offered in a 2-seal configuration and
bottom fold, with our standard flexographically printed artwork.
Please note any bags that are longer than 24” will have a 3rd seal
along the bottom edge. Our bags can also be personalised with
your company logo on any bespoke orders.
Standard Bag Artwork
Our static shielding bags are produced with the following sample
artwork as standard. For further information on bespoke/printed
orders, please contact one of our sales team. Please note there is
a MOQ of 20,000 bags on all printed bags.
1
1
2
2
3
3
Seal
Seal
RND is a trademark of Distrelec