Datasheet

Pink Anti Static
Bubble Bag
Test Conclusion (Date of Issue: 2009-05-12)
The anti-static pink PE bubble bag is tested accordance with the relevant test standard and requirements.
Test Conditions
The following results were taken under the following environmental test conditions:
Temperature: 22.3
o
C / Humidity: 47.5%
Technical Parameters
Item Test Standard Result
Film Composition N/A LDPE / LLDPE
Melt Index GB3682 2.1 g/10 min
Melt Flow Rate GB3682
>3.0 g/min
Surface Resistivity GB3682 <10
10
Ω
Water Absorbtion Rate GB/96-04-10 0.5%
Density GB1033 0.92g/cm
Carrier - LDPE
Heat Seal Temperature - 250-375 F
Heat Seal Time - 0.5-3.5 secs
Heat Seal Pressure - 30-70 PSI
Test Item Test Method Measured Equipment(s) MDL
Lead (Pb) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg
Cadmium (Cd) IEC 62321:2008 Ed.1 Sec.8 ICP-OES 2mg/kg
Mercury (Hg) IEC 62321:2008 Ed.1 Sec.7 ICP-OES 2mg/kg
Hexavalent Chromium (Cr(VI)) IEC 62321:2008 Ed.1 Annex C UV-Vis 2mg/kg
Polybrominated Biphenyls (PBBs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg
Polybrominated Diphenyl Ethers (PBDEs) IEC 62321:2008 Ed.1 Annex A GC-MS 5mg/kg
Product Code Size (inch) Size (mm) Additional Notes
RND 600-00019 3.93 x 5.3 1 100 x 135 Pack of 10
RND 600-00020 5.12 x 7.29 130 x 185 Pack of 10
RND 600-00021 7.09 x 9.25 180 x 235 Pack of 10
RND 600-00022 9.06 x 11.22 230 x 285 Pack of 10
RND 600-00023 11.02 x 14.17 280 x 360 Pack of 10
RND is a trademark of Distrelec