Datasheet
Pink Recloseable
Anti Static Bag
Test Conditions
The following results were taken under the following environmental test conditions:
Temperature: 22
o
C / Humidity: 46%
Technical Parameters
Item Test Standard Result
Film Composition N/A LDPE
Film Thickness Micron Meter 3 Mil 75 micron (+/-8%) (where applicable)
Melt Index GB3682 2.1 g/10min
Surface Resisitivity ANTI/ESD S11.11. >10
7
Ohm/sq <10
10
Ohms
Water Absorbtion Rate GB/96-04-10 0.5%
Density GB 1033 0.92 g/cm
Tensile Strength GB/96-04-10 MD: 32.01 MPa
TD: 33.75 MPa
Breaking Elongation Rate GB/96-04-10 MD: 1200%
TD: 685%
Static Dissipation SJ/T10694-1996 <2 Secs
Appearance GB/96-04-10 Transluscent sheet (no powder and oil)
Size GB/96-04-10
Thickness: +10%
Length: +3mm
Width: +3mm
Tear Strength TD ISO 6383-2 20 kN/m
Tear Strength MD ISO 6383-2 50 kN/m
Tensile Test Film ISO 527-3
Stress at Break TD 18 Mpa
Stress at Break MD 30 Mpa
Strain at Break TD > 500%
Strain at Break MD > 100%
Modulus of Elasticity MD 190 MPa
Coefficient of Friction ASTM D 1894 0.2
RND is a trademark of Distrelec