User Manual

Lead Free Solder Pot
 The solder pot is not a toy, and must be kept out of children’s reach. It is not intended for
use by individuals with reduced physical, sensory or mental capabilities, or lack of training,
experience and knowledge, unless a person responsible for their safety has provided
supervision or instruction concerning the use of this device.
 Be warned of being burned: Do not touch the surface during the operation as the pot
surface temperature will be quite high.
 In case of power failure, switch it off. It can prevent the pot from being damaged by instant
high voltage.
 Use only indoors and in well ventilated places.
 Make sure the voltage corresponds to that in the rating label on the pot.
 If the power cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard
 During breaks, keep children away and do not leave the pot unattended while it is still on.
 Unplug it by gripping the plug only instead of power cord when the pot is not in use or being
cleaned.
 Always leave the pot to cool off completely before cleaning or storing it.
 Do not immerse the pot in any kind of liquid.
 Do not put the pot in damp, flammable, corrosive or dust-rich environment.
 Do not use the pot after it or its power cord has been damaged. Have it repaired by a
professional.
 Do not run the power cord against sharp edges or over hot surfaces.
 Do not disassemble the pot and or attempt to repair it by yourself. It does not contain any
part serviceable for you. In case of questions or problems, turn to our customer service.
 Do not put the pot on materials likely to melt such as plastic or imitation leather.
Attention:
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com