Datasheet

Technical Information
CHEMICAL NAME
Chemical Composition
CAS#
Non-ionic flux mixture (Proprietary non-
hazardous blend)
Copper
Performance & Application Data
Flux
Solids Content, Flux
Solder Dip Test
Flux Induced Corrosion
7440-50-8
<5% (per IPC-TM-650 2.3.34)
Non-ionic Flux Mixture
12.7mm (0.5, ) minimum
No breakthrough or corrosion
(per IPC-TM-650 2.3.32)
Presence of Halides in Flux 0% CI , Br and F (per IPC-TM-650 2.3.3)
Determination of Acid Value of Liquid Solder
Acceptance range: 86-202 acid value,
based on solids content of flux (per IPC-TM-
Environmental Policy
RND is commied to developing products to ensure a safer and cleaner environment. We will
continue to meet and sustain the regulations of all federal, state and local government agencies
Resources
For additional technical information on this product please contact us at [e-mail].
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to
differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended applica-
tion. Conditions of use are outside our control and vary widely. RND’s only obligation and your only solution is replacement of product that is
shown to be defective when you receive it. In no case will RND be liable for any special, incidental, or consequential damages based on breach of
warranty, negligence or any other theory.
Page 2
Distrelec Schweiz, Zweigniederlassung
der Dätwyler Schweiz AG
Grabenstrasse 6
CH-8606 Nänikon
www.distrelec.ch