Datasheet

SAFETY DATA SHEET
SOLDERING TIP CLEANER
According to Regulation (EU) 2015/830, amending Annex II of Regulation
(EC) N
o
1907/2006 (REACH)
Revision date: 09/11/2016
7.1 Precautions for safe handling
Advice on safe handling
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray.
Advice on protection against fire and explosion
Not highly flammable.
Further information on handling
Avoid contact with skin and eyes.
Page 4/10
6.2. Environmental precautions
Do not allow to enter into surface water or drains
6.3. Methods and material for containment and cleaning up
Take up mechanically. Treat the recovered material as prescribed in the section on waste disposal.
6.4. Reference to other sections
Treat the recovered material as prescribed in the section on waste disposal . See protective measures under point 7 and 8.
7.2 Conditions for safe storage, including any incompatibilities
Surface active agent
Further information: refer to Technical Data Sheet.
7.3. Specific end use(s)
Requirements for storage rooms and vessels
Keep container tightly closed.
Advice on storage compatibility
To follow: Storage class.
Further information on storage conditions
Protect against direct sunlight.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control parameters
o
SECTION 7. HANDLING AND STORAGE
Additional advice on limit values
Does not contain substances above concentration limits fixing an occupational exposure limit.