Datasheet

SAFETY DATA SHEET
SOLDERING TIP CLEANER
According to Regulation (EU) 2015/830, amending Annex II of Regulation
(EC) N
o
1907/2006 (REACH)
Revision date: 09/11/2016
5.1 Extinguishing media
Suitable extinguishing media
Co-ordinate fire-fighting measures to the fire surroundings.
The product itself does not burn.
Page 3/10
After inhalation
Provide fresh air..
After contact with skin
Wash with plenty of water. Change contaminated clothing.
After contact with eyes
If product gets into the eye, keep eyelid open and rinse immediately with large quantities of water, for at least 5 minutes.
Subsequently consult an ophthalmologist.
After ingestion
Rinse mouth immediately and drink plenty of water.
4.2. Most important symptoms and effects, both acute and delayed
Rinse mouth immediately and drink plenty of water.
4.3. Indication of any immediate medical attention and special treatment needed
No known symptoms to date.
5.2 Special hazards arising from the substance or mixture
In case of fire: Wear self-contained breathing apparatus.
Additional information
Suppress gases/vapours/mists with water spray jet. Collect contaminated fire extinguishing water separately.
Do not allow entering drains or surface water.
5.3 Advice for firefighters
SECTION 6. ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures
o
SECTION 5. FIREFIGHTING MEASURES
Provide adequate ventilation. Avoid generation of dust. Do not breathe dust. Avoid contact with skin, eyes and clothes.
Wear personal protection equipment .