Datasheet

ManualsBrandsRND Lab ManualsSolderSyringe Flux Paste Nozzle Cleaner 10ml

SAFETY DATA SHEET

SOLDERING TIP CLEANER

According to Regulation (EU) 2015/830, amending Annex II of Regulation

(EC) N

1907/2006 (REACH)

Revision date: 09/11/2016

TRADE NAME DESCRIPTION

SECTION 1. IDENTIFICATION OF SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

1.1 PRODUCT IDENTIFIER

1.2 Relevant identiﬁed uses of the substance or mixture and uses advised against.

Identiﬁed uses

Uses advised against

NOZZLE-STICK-MASSE or SOLDERING TIP CLEANER

No identiﬁed use(s). Do not use for private purposes (household).

Page 1/10

Industrial use of processing aids. methods for cleaning up

TIP CLEANER

SECTION 2. HAZARDS IDENTIFICATION

2.1 Classiﬁcation of the substance or mixture.

REGULATION (EC) N

Classiﬁcation according to Directive 67/548/EEC or 1999/45/EC

Indications of danger:

Xi - Irritant

R phrases: Irritating to eyes.

Classiﬁcation according to Regulation (EC) No. 1272/2008 [CLP]

Hazard categories:

Serious eye damage/eye irritation: Eye Irrit. 2

Hazard Statements:

Causes serious eye irritation.

2.2. Label elements

Signal word: Warning

Pictograms: GHS07

Summary of content (10 pages)

PAGE 1
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 SECTION 1. IDENTIFICATION OF SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 PRODUCT IDENTIFIER TRADE NAME DESCRIPTION TIP CLEANER NOZZLE-STICK-MASSE or SOLDERING TIP CLEANER 1.2 Relevant identified uses of the substance or mixture and uses advised against. Identified uses Industrial use of processing aids.
PAGE 2
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 Hazard statements H319 Causes serious eye irritation. Precautionary statements P260 Do not breathe dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
PAGE 3
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 After inhalation Provide fresh air.. After contact with skin Wash with plenty of water. Change contaminated clothing. After contact with eyes If product gets into the eye, keep eyelid open and rinse immediately with large quantities of water, for at least 5 minutes. Subsequently consult an ophthalmologist.
PAGE 4
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 6.2. Environmental precautions Do not allow to enter into surface water or drains 6.3. Methods and material for containment and cleaning up Take up mechanically. Treat the recovered material as prescribed in the section on waste disposal. 6.4.
PAGE 5
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 8.2. Exposure controls Appropriate engineering control Do not breathe gas/fumes/vapour/spray. Protective and hygiene measures Remove contaminated, saturated clothing immediately. Protect skin by using skin protective cream. After work, wash hands and face. When using do not eat or drink.
PAGE 6
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 Test method pH-Value: not applicable etc.: Changes in the physical state Melting point: ca100 °C Initial boiling point and boiling range: >300 °C Density (at 20 °C): ca. 1,3 g/cm³ Solubility in other solvents Isopropyl alcohol. , Ethanol. Solvent content: ca. 8% SECTION 10: STABILITY AND REACTIVITY 10.1.
PAGE 7
SAFETY DATA SHEET SOLDERING TIP CLEANER According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) Revision date: 09/11/2016 SECTION 11: TOXICOLOGICAL INFORMATION 11.1. Information on toxicological effects Toxicocinetics, metabolism and distribution No data available Acute toxicity Irritation and corrosivity Irritating to eyes.
PAGE 8
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 12.4. Mobility in soil No data available 12.5. Results of PBT and vPvB assessment This substance does not meet the criteria for classification as PBT or vPvB. 12.6. Other adverse effects No data available Do not mix with other wastes.
PAGE 9
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 Marine transport (IMDG) 14.2. UN proper shipping name: No dangerous good in sense of these transport regulations. Other applicable information (marine transport) No dangerous good in sense of these transport regulations. Air transport (ICAO) 14.2. UN proper shipping name: No dangerous good in sense of these transport regulations.
PAGE 10
SAFETY DATA SHEET According to Regulation (EU) 2015/830, amending Annex II of Regulation (EC) No1907/2006 (REACH) SOLDERING TIP CLEANER Revision date: 09/11/2016 SECTION 16: OTHER INFORMATION Relevant R-phrases (Number and full text) 36 Irritating to eyes. EU regulatory information o Relevant H- and EUH-phrases (Number and full text) H315+H320 Causes skin and eye irritation. H319 Causes serious eye irritation. EUH210 Safety data sheet available on request.