User Manual

Maintenance:
 Unplug the tool and make sure its temperature has dropped to the room temperature before maintenance or cleaning.
 Wipe the tool with a soft cloth if there's dirt on it.
 Do not use metal brushes, decontamination powder, gasoline, chemical rags, etc. Damage or discoloration may occur.
Checks before use:
In order to ensure the safety, it is suggested to run the following checks before use.
Whether there's damage on the tool.
Whether there's damage on the power cord protector.
Whether there's deformation or damage on the plug.
Whether the switch can be turned on and off without problems.
Whether there's abnormal sounds when shaking the tool gently.
※Whether there's abnormal sounds when the tool is powered up.
※Whether there's odor or smoke when the tool is powered up.
If the case in ※ occurs, turn off the power immediately and unplug the tool.
If the abnormal phenomenon occur, stop the use immediately and turn to the vendor or the customer consultation center.
Low Temperature Mini
Hot Air Gun
Art Nr.
RND 555-00003
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com