User Manual

2
English
Read First
Safety Informaon
To ensure safe operaon and service of the Tester, follow these instrucons.
Failure to observe warnings can result in severe injury or death.
WARNING
Individual protecve equipment should be used if HAZARDOUS LIVE parts in the installaon
where measurement is to be carried out could be ACCESSIBLE.
CAUTION
If the equipment is used in a manner not specied by the manufacturer, the protecon
provided by the equipment may be impaired.
WARNING
• Always use proper terminals, switch posion, and range for measurements.
• To reduce the risk of re or electric shock, do not expose this product to rain or moisture.
• Verify the Meter operaon by measuring a known voltage. If in doubt, have the Meter
serviced.
• Do not apply more than the rated voltage, as marked on Meter, between terminals or
between any terminal and earth ground.
• Verify the Meter’s operaon by measuring a known voltage. If in doubt, have the Meter
serviced.
• Do not apply more than the rated voltage, as marked on Meter, between terminals
or between any terminal and earth ground.
• To avoid false readings that can lead to electric shock and injury, replace baery as soon
as low baery indicator.
• Do not use Meter around explosive gas or vapor.
• When using test leads or probes, keep your ngers behind the nger guards.
• Remove test lead from Meter before opening the baery door or Meter case.
• Use cauon with voltages above 30 Vac rms, 42 Vac peak, or 60 Vdc. These voltages pose
a shock hazard.