User Manual

8
Making Basic Measurements
Discharge the DUT (Device Under Test) before connecng the test probes.
The gures on the following pages show how to make basic measurements.
Power On/O
Press the central power buon to turn on. Press and hold the power
buon > 2 sec to turn o.
Auto Power O
If there is no any acon in the meter, then the meter will
automacally turn o to save the power of baery. The default
APO me is 10 minutes.
Backlight
When the meter is turned on, the backlight will be turned on
automacally. Press the central power buon to turn on/o the
backlight.
Preparaon and Cauon Before Measurement
Observe the rules of Warnings and Cauons