User Manual

13
Charge
Connect to PC
There is a Li-ion baery as power source in the meter. When the baery indicator shows low
baery, charge the meter as soon as possible. When baery charge complete, the baery
indicator will show full level on the display.
• Always use the typical mini USB plug adaptor to charge.
• Do not connue to charge more than 8 hours to prevent the baery damage.
The meter can connect to PC by USB cable. Follow the below steps to setup.
1. Connect PC and meter by USB cable.
2. Turn on the meter power.
3. Insert the soware CD to CD-ROM of PC.
4. Install the driver and soware.
5. Start the soware and communicate with meter.