Manualshelf

User Manual

ManualsBrandsRND Lab ManualsComponent Testing InstrumentsLCR Meter, Handheld, 20MOhm, 2H, 200uF
12345678910
11
When “Srt” appears on the display, make the test probes short closely, and press
the Cal/Hz buon to start short calibraon. During short calibraon, the “Srt” blinks on t
he display. About 15 seconds later, the result of the short calibraon appears on the
display. If the result shows "PASS", press the Cal/Hz buon to nish calibraon. If the result
shows "FAIL", press the Cal/Hz buon to exit calibraon mode.