Manualshelf

User Manual

ManualsBrandsRND Lab ManualsDigital Multimeters - HandheldAutoranging Digital Multimeter 1kV 5MHz 40MOhm
12345678910
14
EN
15
EN
1. Disconnect the test leads from the meter and any item under test.
2. Open the fuse door by loosening the screw on the door using a Phillips head screwdriver.
3. Remove the old fuse from its holder by gently pulling it out.
4. Install the new fuse into the holder.
5. Always use a fuse of the proper size and value (0.5A/1000V fast blow for the 400mA range,
10A/1000V fast blow for the 10A range).
6. Put the fuse door back in place. Insert the screw and tighten it securely.
WARNING: To avoid electric shock, do not operate your meter until the fuse door is in place
and fastened securely.