User Manual

6 7
ENEN
3-2.Understanding the Display
1.So key labels Indicates the funcon of the buon just below the displayed label.
2.Bar graph Analog display of the input signal.
3.Minus sign Indicates a negave reading.
4.Displays measurement informaon about the input signal.
5.Indicates the range the Meter is in and the ranging mode (auto or manual)
6.Time Indicates the me set in the internal clock.
7.Buetooth Indicate
8.Baery level Indicates the charge level baeries.
9.Beeper Indicates the Meter’s beeper is enabled (not associated with the
connuity beeper).
10.Units Indicates the units of measure.
-0.0 4
Auto range
06:32
GRAPH
-500 -300 -100 01 00
300 500mV
MODE SAVE MAX
mV
1
2
4
5 6
7
10
9
8
3
3-3.Understanding the Push Buons
The 6 push buons on the front of the Meter acvate features that augment the funcon
selected using the rotary switch, navigate menus or control power to Meter circuits.
F1 Soware Key: Default switch to Graph measure.
F2 Soware Key: Default modes related to the rotary switch funcon
F3 Soware Key: Default into save mode default Display. And wake up for APO.
F4 Soware Key: Default modes MIN/MAX starts and stops MIN/MAX recording.
RANGE Buon: Into manual range and select range of the measure, if pressing the Range
Buon for greater that 1 second will return Auto Range.
HOLD/REL Buon: Freezes the present reading in the display and allows the
display to be saved,
if pressing the HOLD/REL Buon for greater that 1 second will switch relave mode.
HOLD/REL Buon: Freezes the present reading in the display and allows the display to be
saved,if pressing the HOLD/REL Buon for greater that 1 second will switch relave mode.
3-4.Understanding the Rotary Switch
• Select a primary measurement funcon by posioning the rotary switch to one of the
icons around its perimeter.
• For each funcon, the Meter presents a standard display for that funcon
(range, measurement units and modiers).
• Buon choices made in one funcon do not carry over into another funcon.
AC/DC Amps Measurements.
mA : AC/DC Milliamps Measurements.
% 4-20mA Measurements.
AC/DC Microampere Measurements up to 5,000μA.
AC Voltage Measurements
DC and AC+DC Voltage Measurements.
AC/DC Milli-Volts Measurements.
Frequency and Duty Cycle Measurements.
Ω Resistance, Diode Test, Capacitance and Connuity Measurements.
Temperature Measurements.
10A :
mA :
4~20mA%:
µA :
V :
V AC+DC:
mV :
Hz%:
CAP:
Temp: