User Manual

24 25
EN EN
5-12.Info
• Viewing data stored in the Meter’s memory is performed through the save menu.
• Press the DOWN Buon (F3), posion the menu selector next to the menu item labeled
Info and pressing the the ENTER Buon (F1).
Auto range
06:32
ENTER UP DOWN CANCEL
Auto range
06:32
DOWN CLOSEUP
g
r
6.Setup Opons
• Viewing data stored in the Meter’s memory is performed through the save menu.
• Press the DOWN Buon (F3), posion the menu selector next to the menu item label
Setup and pressing the ENTER Buon (F1).
Auto range
06:32
ENTER UP DOWN CANCEL
Auto range
06:32
ENTER UP DOWN CANCEL
Reset
Format
Display
Meter Inf
Bluetooth
Calibration
Temperature
6-1.Reseng Meter
• The Meter’s setup opons can be reset to default values through the setup menu.
• Open the setup menu, posion the menu selector next to the menu item labeled Reset
and press the ENTER Buon (F1).
• Then a message will appear asking to conrm the reset acon.
• Press the OK Buon (F2) to perform the reset.
6-2.Meter Info
• The Meter Info selecon lists the serial number, rmware version, are displayed.
• Open the setup menu, posion the menu selector next to the menu item labeled Meter
Info and press the ENTER Buon (F1).
DOWN
DOWN
Fno. Graph- According to graphically display
measurement informaon
Fno. Mode-Related to the rotary switch funcon
Fno. Save-Accesses the memory management
menu for saving measuremnt, seng up recording
sessions, or viewing and deleng stored
measurements from memory
CLOSE
DOWN DOWN
5-11.Viewing Trend Data
• Viewing data stored in the Meter’s memory is performed through the save menu.
• Press the DOWN Buon (F3), Posion the menu selector next to the menu item labeled
ViewR and pressing the ENTER Buon (F1).
• Press the the TREND Buon (F1).
• Press the + Buon (F2) to increase graph resoluon, press the >> Buon (F3) to
move cursor.