User Manual

22 23
EN EN
5-6.Save Funcon
Press the SAVE Buon (F3), into save menu.
Auto range
06:32
ENTER UP DOWN CANCEL
5-7.Storing Individual Measurement Data
• For common measurement funcons, a snapshot of the screen data is saved by pressing
the SAVE Buon (F3).
• Then pressing the DOWN Buon (F3) to the save select item, pressing the
ENTER Buon (F1).
5-8.Viewing Memory Data
• Viewing data stored in the Meter’s memory is performed through the save menu.
• Press the DOWN Buon (F3), posion the menu selector next to the menu item labeled
ViewM, and pressing the ENTER Buon (F1).
Auto range
06:32
ENTER UP DOWN CANCEL
5-9.Viewing Graph Data
• Viewing data stored in the Meter’s memory is performed through the save menu.
• Press the DOWN Buon (F3), posion the menu selector next to the menu item labeled
ViewG, and pressing the ENTER Buon (F1).
• Press the << Buon (F2) and the >> Buon (F3) to move cursor.
5-10.Recording Measurement Data
• Press the SAVE Buon (F3), then pressing the DOWN Buon (F3) to the Record select
Item, pressing the ENTER Buon (F1), Press the sokey labeled Start to start records.
• The recording session will connue unl the allocated memory is used, the baeries
expire, the rotary switch is moved, or the session is terminated by pressing the CLOSE
Buon (F4) labeled stop.
Auto range
06:32
ENTER UP DOWN CANCEL
366. 55
Auto range
06:32
DOWN CLOSE
mV
UPENTER
Set Duration: 00Days 00Hrs 01Min
Set Sample Interval: 00Min 01Sec
Start Record
Battery: partly empty
ENTER
UP DOWN CANCEL
DOWN
Set Duraon: 00Days 00Hrs 01Mins
Set Sample Interval: 00Min 01Sec
Start Record
Baery: partly empty
DOWN DOWN