User Manual

20 21
EN EN
• Press the SAVE Buon (F1) to save graph.
• Press the BACK Buon (F4) to return.
5-2.Capturing Minimum and Maximum Values
• To acvate the MAX/MIN mode, Press MAX Buon (F4) at measure mode.
• As shown in Figure, the Meter displays eat the top of the measurement page, and the
MAX/MIN start date and me along the boom of the page.
• In addion, the recorded maximum, average, and minimum values appear in the
secondary display with their respecve elapsed mes.
• To stop a MAX/MIN recording session, press the STOP Buon (F2).
• Thesummary informaon in the display freezes, and the sokeys change funcon to allow
saving the collected data.
• Pressing the CLOSE Buon (F4) exits the MAX/MIN record session without saving the
collected data.
• To save the MAX/MIN screen data, the MAX/MIN session must be ended by pressing the
STOP Buon (F2), Next, press the SAVE Buon (F3).
Auto range
06:32
SAVE BACK
0
0.0000 V
Rate: 0.2 s
Range: 0.01
5-3.Capturing Peak Values
To acvate the peak mode, at AC measure MAX/MIN mode , Press the PMAX Buon (F4).
5-4.Relave Values
To acvate the relave mode, Press the HOLD/REL Buon for greater that 1 second.
-0 . 0430
Auto range
06:32
GRAPH MODE SAVE MAX
V
REL
Reference0 .3079 V
0.2649 V
5-5.Hold Mode
• To freeze the display for any funcon, Press the HOLD/REL Buon.
• Press the SAVE Buon (F3) to memory and the CLOSE Buon (F4) return measure.
STOP