Datasheet
4 mm Banana (female) Jack
(socket) w/ 1.9 mm x 12 mm long Pin
RND is a trademark of Distrelec
RN
D Part Nr.
Col
our
RND 350
-00132
Red
RND 350-0
0131
Black
1000 V
CAT II / 1000 V CAT III / 600 V CAT IV, reinforced
insulation, pollution degree 2 , 36 A
Applications
Ideal for panel mounting, round nut fixing
Specificatio
n
Electrical protection
RND 350-00131
RND 35
0-00132
Electrical Safety
The design of the socket front face meets the requirements of EN / IEC 61010-031:2015 and
the socket design is compatible with EN / IEC 61010-1:2010 for reinforced insulation at 1000
V CAT II / 1000 V CAT III / 600 V CAT IV and 36 A (at 40 °C)
These specifications come from the creepage distances, clearances, solid insulation, and CTI
of the socket. And the considered building and implementation specifications are :
insulating panel ; pollution degree of the micro-environment, 1 or 2 ; relative humidity of
the micro-environment, 80 % maximum for temperatures up to 31 °C decreasing linearly to
50 % relative humidity at 40 °C ; temperature range of the micro-environment, +5 °C to +40
°C ; indoor use ; and altitude, 2000 m maximum. IP2X (touch-protected) protection on the
front face according to EN / IEC 60529.
Operating Temperature
-20 ... 80 °C
Conductor Material Brass
Protection Against Fire
The socket design is compatible with the EN / IEC 61010-031:2015 requirements of protection against the spread of fire and resistance
to heat by its basic insulation.
The socket design is compatible with the EN / IEC 61010-1:2010 requirements of eliminating / reducing the sources of ignition within
the equipment by its basic insulation. The socket isn't designed to comply with the building of equipment containing or using flammable
liquids and with circuits producing heat.
Conformity
• European Directive "Low Voltage Directive" 2014/35/EU.
• European Directive “RoHS” 2011/65/EU. European Directive 2015/863/EU.
• European regulation n°1907 / 2006 “REACH”.
• European regulation 2017 / 821 “Conflict minerals”.
• International / European standard EN / IEC 61010-031:2015.
• International / European standard EN / IEC 61010-1:2010.
Environment
• "RoHS" compliant, Pb ≤ 4 % in conductor, Pb ≤ 0.1 % in insulator, Hg ≤ 0.1 %, Cr VI ≤ 0.1 %, Cd ≤ 0.01 %, PBB ≤ 0.1 %, and PBDE ≤ 0.1 %
• "REACH" compliant, no substances from the candidate list of SVHC for authorisation at mass concentrations greater than 0.1 %