Datasheet

Alligator Clip w/ Solder
Wire Attachment
RND Part Nr. Colour
RND 350-00072
Black
RND 350-00071 Red
Gather a solder iron (150 W maxi.), some (lead or lead-free) tin
solder wire, a stranded or solid wire with the specifications
below, a tool to strip the wire and a crimping tool. I strip the end
of the wire on 5 mm typically.
Strands.
Jacket(s).
Ø1.9 mm maxi.
2.50 mm² maxi.
(approximately AWG13).
Ø3.0 mm maxi..
5 mm typically.
Remove the soft synthetic “rubber” sheath.
Put the stripped end of the wire into the hole of soft synthetic
“rubber” sheath. Put the stripped end of the wire into the hole of
the metal clip (if necessary push the strand of the spring that may
clog the hole of the metal clip).
With the solder iron and the tin solder wire solder the wire on
the metal clip (it complies with both lead-free tin and lead-tin). (If
necessary cut the excess of wire under the metal clip.)
Can crimp the two corners of the metal clip on the wire with the
crimping tool.
Put the soft synthetic “rubber” on the metal clip.
How to use: to attach a wire.
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com