Datasheet

DIY Straight 4 mm Banana

(female) Jack

RND is a trademark of Distrelec

Features

Solder wire attachment

Specification

Electrical protection

30 V AC/ 60V DC, 3

6 A @ 40 °C

Operating Temperature

-20 ... 80 °C

Conformity

European Directive "RoHS" 2011/65/EU

uropean REACH regulation n°1907 / 2006.

Environment

"RoHS" compliant, Pb ≤ 4 % in conductor, Pb ≤ 0.1 % in insulator, Hg ≤ 0.1 %,

Cr VI ≤ 0.1 %, Cd ≤ 0.01 %, PBB ≤ 0.1 %, and PBDE ≤ 0.1 %.

"REACH" compliant, no substances from the candidate list of SVHC for

authorisation at mass concentrations greater than 0.1 %.

Conductor Material Brass

The 4 mm banana

female connection

complies with the

4 mm banana plugs

of the worldwide

most famous

manufacturers.

Metal part.

Plastic part.

Ø11

Hole to slip

the strands of

the wire into.

Slot for 3.5 mm flat-

bladed screwdriver. Used

to assemble the jack.

Cross-section of the plastic part.

Room to solder

the wire to the

metal part.

PAGE 1
DIY Straight 4 mm Banana (female) Jack Features Solder wire attachment Specification Electrical protection Operating Temperature Conductor Material 30 V AC/ 60V DC, 36 A @ 40 °C Conformity European Directive "RoHS" 2011/65/EU. European REACH regulation n°1907 / 2006. -20 ... 80 °C Brass "RoHS" compliant, Pb ≤ 4 % in conductor, Pb ≤ 0.1 % in insulator, Hg ≤ 0.1 %, Cr VI ≤ 0.1 %, Cd ≤ 0.01 %, PBB ≤ 0.1 %, and PBDE ≤ 0.1 %.
PAGE 2
DIY Straight 4 mm Banana (female) Jack How to Use, Attach a Wire Gather a 3.5 mm flat-bladed screwdriver, a solder iron (150 W maxi.), some (lead or lead-free) tin solder wire, a stranded or solid wire with the specifications below, and a tool to strip the wire. Strip the end of the wire on 7 mm typically (6 mm at least). Ø0.6 mm maxi. 0.30 mm² maxi. (approximately AWG22). Strands. 7 mm typically (6 mm at least). Ø2.7 mm maxi.. Jacket(s).