Datasheet

DIY Stacking 4 mm Banana(male)
Plug
RND Part Nr. Colour
RND 350-00028
Black
RND 350-00029
Blue
RND 350-000
30
Yellow
RND 350-00031
RND 350-00027 Red
Green
RND 350-00033
Brown
RND 350-00035
White
How to use: to attach a wire
I gather a 1.5 mm Allen wrench a stranded wire with the
specifications above and a tool to strip the wire. I check that the
wire and the parts of the plug have no default. I strip the end of the
wire on 7 mm typically.
With the 1.5 mm Allen wrench I unscrew the Allen screw without
removing it.
I slip the stripped end of the wire through the gray plastic part and
into the transverse hole of the metal part as shown below.
With the 1.5 mm Allen wrench I screw and tighten (2.3 N.m maxi.
torque) the Allen screw on the end of the wire.
I insert the metal part into the gray plastic part while I pull the
wire. I insert the other side of the metal part into the snap-on
plastic part. I push the gray plastic part towards the snap-on plastic
part until they clip. As shown below.
I check the gray plastic part is well locked in the snap-
on plastic
p
art.
Strands
.
Jacket(s
).
Ø3
.8 (+0.1/-0.2) mm. 7 ±1 mm.
Ø2.6 mm maxi. (approximately AWG 12).
0.75 mm² mini., 2.50 mm² maxi..
Safety compliant with
1000 V CAT II / 600CAT III /
3
00 V CAT IV.
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com