Datasheet

RND is a trademark of Distrelec
4 mm Banana (female) Jack (socket)
RND Part Nr. Colour
RND 350-00016
Red
RND 350-00017
Yellow
RND 350-00018 Green
RND 350-00019
RND 350-00015 Black
RND 350-00020 White
Blue
How to Implement
Gather open-end spanners SW9 mm and SW8 mm, a panel with the
specifications below, and a tool to drill the panel as below.
Drill the panel as above with the tool.
If the nuts and the spacer are mounted on the socket then remove them.
Push the socket into the hole of the panel as shown below.
Take care of the direction of the spacer (picture above) and put it on the
rear side of the socket. Then put the nut on the rear side of the socket too.
Hold the front hexagonal insulator with the spanner SW9, hold the nuts
with the spanner SW8, then screw and tighten it (2.3 N.m maxi. torque).
Now the socket is attached to the panel as shown below.
Panel.
Maxi. thickness : 4 mm.
Pitch circle diameter to drill the panel :
Ø8.0 (+0.1/-0) mm
Rear face of the panel. Front face of the panel.
Spacer. Nuts. Panel.