User Manual

26
:BATTery
:BATT
Output all steps according to the battery
mode
:BATT 2,30A,7A,
35V,11AH,50S
This command means: setting
the battery range 30A,
discharge current 7A,
discharge cutoff voltage 35V,
discharge cutoff capacity
11AH, and discharge time 50s,
which save in LIST 2.
no
27
:RCL:BATTery
:RCL:BATT
1-10
Recall/query the battery unit. Recall the
query unit before query and then use the
query.
:RCL:BATT 5
Recall the battery storage
LIST 5
:RCL:BATT？
>30A,7A,35V,11AH,5S
Query LIST 5
28
:BATTery:TIM Query the time in the battery mode no
:BATTery:TIM
>5.00S
29
:BATTery:CAP Query the capacity in battery mode no
:BATTery:CAP
>5.00AH
30 :DYNamic
<NR1>
1-6
Query and set the dynamic test mode:
1 refers to dynamic CV, 2 refers to
dynamic CC, 3 dynamic CR, 4 dynamic CW, 5
indicates pulse mode and 6 flip mode.
:DYN
1,1.0001V,2.0003V,1.101HZ,50.
0001%
dynamic CV
:DYN?
>1,1.0001V,2.0003V,1.1
01HZ,50.0001%
Return the value of
the dynamic mode; set
before using this
command.