User Manual

5． Deviceportnumber：18190
AsshowninFigure5‐1below:

Figure5‐1Networkdebuggingassistantanddevicecommunication
Precautions：
1. Thedeviceportnumberandcomputerportnumbermustbethesame.
The device port number is changed to 35876, then the computer
configurationportmustalsobe35876;
2. ModifytheIPandsubnetmaskthroughthe
networkconfiguration.The
gatewaywilltakeeffectonlyafterthedeviceisrestarted.Ifitisanother
interface(suchasserialportorUSB),itwilltakeeffectimmediately;
3. Iftheparameterconfigurationiswrong,thenetworkcan’tcommunicate,
need to reset the  parameters, and you can reset through RS232
 serial
portorUSB,orusetherestorefactorycommanddirectly.