Datasheet
8
Mode 2 - Continuous Adjustment Mode
The voltage and current levels can be changed by pushing the knobs.
Press and hold for 3 seconds to lock the front panel and
then press again and hold for 3 seconds to unlock the
panel.
Press and hold for 3 seconds to start OCP mode, where
reaches the set value. In the OCP mode, rotate this knob
to recover the output. Press and hold for 3 seconds again
Mode 3 - Remote Control Mode
(only for RND 320-KD3005P)
Push and hold the VOLTAGE knob for 3 seconds to lock
the power supply will be ON and OFF accordingly. Push
and hold the VOLTAGE knob again for 3 seconds and
unlocked.