Datasheet

5.4 Drop Test
The batteries should withstand three drops from 75cm in any orientation onto an oak
board.
Open circuit voltage should be kept over 9.3V.
Closed circuit voltage should be kept over 8.7V.
5.5 Temperature Cycling Test
Store the cells in the temperature chamber at temperature cycling for 10 cycles, any
defects should not be observed in appearance and dimensions.
5.6 Short-Circuit Test
The batteries should be short–circuited for 2hours at room temperature. Any defects
should not be observed in appearance.
6. Expiry Period:
10 years
7. Expiry Date Marking:
7.1 Unless otherwise specified, one date code will be marked on the package plate of blisters or cards for
finished cells. The date code will be followed by month and year of manufacturing for domestic and date
code will be followed by month and year of expiry for export.
7.2 For private label, can mark according to customer's requirements.
8. Packaging Requirements
8.1 The total of heavy metal lead, cadmium, mercury, and hexavalent chromium concentration shall not
exceed 100 ppm in Packaging materials and printing inks. Ozone depleting substances (ODS) shall not be
used in the manufacturing of any packaging.
The printing on each cell label is legible and permanent. Label defects, if any, shall conform to mutually
agreed upon limit samples.
8.2 It is recommended that packaging for shipment and sales according with Packaging Specification of
Pairdeer CR-V9. For example, 1pcs cells in a card, 30 cards in a display box, and 8 display boxes in a final
outer carton. Flow chart as next page:
8.3 Otherwise packaging for shipment and sales shall conform to the mutually agreed to Packaging
Specification of .the designated customers.
-10℃
60℃
1h 1h 1h 1h
1 cycle
RND is a trademark of Distrelec
Primary Lithium Battery
RND 305-00004E