User Manual

3
Symbols as marked on the Meter
and Instruction manual
Risk of electric shock
See instrucon manual
DC measurement
Equipment protected by double or reinforced insulaon
Baery
Fuse
Earth
AC measurement
Conforms to EU direcves
Do not discard this product or throw away.
Unsafe Voltage
To alert you to the presence of a potenally hazardous voltage, when the Tester detects a
voltage 30 V or a voltage overload (OL) in V, mV, AutoV . The symbol is displayed.
Maintenance
Do not aempt to repair this Meter. It contains no userserviceable parts. Repair or servicing
should only be performed by qualied personnel.
Cleaning
Periodically wipe the case with a dry cloth and detergent. Do not use abrasives or solvents.
• Disconnect circuit power and discharge all high-voltage capacitors before tesng
resistance, connuity, diodes, or capacitance.
• Do not use Meter around explosive gas or vapor.
• To reduce the risk of re or electric shock do not expose this product to rain or moisture.
• Disconnect the test leads from the test points before changing the posion of the
funcon rotary switch.
• Do not expose Meter to extremes in temperature or high humidity.
• Never set the meter in A funcon to measure the voltage of a power supply
circuit in equipment that could result in damage the meter and the equipment under test.
CAUTION