User Manual

2
English
Read First
Safety Informaon
Understand and follow operang instrucons carefully. Use the meter only as specied
in this manual; otherwise, the protecon provided by the meter may be impaired.
WARNING
Idenes hazardous condions and acons that could cause BODILY HARM or DEATH.
CAUTION
Idenes condions and acons that could DAMAGE the meter or equipment under test
WARNING
• When using test leads or probes, keep your ngers behind the nger guards.
• Remove test lead from Meter before opening the baery door or meter case.
• Use the Meter only as specied in this manual or the protecon by the Meter might be
impaired.
• Always use proper terminals, switch posion, and range for measurements.
• Verify the Meter’s operaon by measuring a known voltage. If in doubt, have the Meter
serviced.
• Do not apply more than the rated voltage, as marked on Meter, between terminals or
between any terminal and earth ground.
• Only replace the blown fuse with the proper rang as specied in this manual.
• Use cauon with voltages above 30 Vac rms, 42 Vac peak, or 60 Vdc. These voltages pose
a shock hazard.
• To avoid false readings that can lead to electric shock and injury, replace baery as soon
as low baery indicator.
• Disconnect circuit power and discharge all high-voltage capacitors
before tesng resistance, connuity, diodes, or capacitance.
• Do not use Meter around explosive gas or vapor.
• To reduce the risk of re or electric shock do not expose this product to rain or moisture.