Datasheet

ManualsBrandsRND Lab ManualsDigital Multimeters - HandheldIndustrial Multimeter + FREE 9V Battery 1kV 100kHz 40MOhm

AC+DC True RMS

Industrial Multimeter

RND 355-00002

RND is a trademark of Distrelec

Features

• 6000 count digital display.

• 62 segment bar graph .

• Extra Large scale display and white backlit

• True RMS

• 0.08% basic DCV accuracy

• Automatic AC/DC Voltage detect with low impedance (Auto-V LoZ)

• VoltSeek (Non-Contact Voltage detect)

• Smart Data Hold

• Peak Hold (1ms)

• Min/Max function

• AC+DC function

• Frequency Counter on AC mode

• Capacitance Measurement

• Temperature

• Low battery indicator with segments

• Auto Power Off (20 minutes)

• Shock proof from 4 feet drops

• CAT.IV 600V/CAT. III 1000V Safety standard

Specifications

Maximum voltage applied to any terminal: 1000 V

rms or 1000 V

dc.

rms

Display: 6000 counts.

Polarity Indication: Automatic, positive implied, negative indicated.

Overrange Indication: OL

Batteries Life: 200hours ALKALINE Battery (No Backlight)

Low Batteries Indication: Voltage drops below operating voltage, will flash.

Power Requirement: 9V battery

Auto Power Off: 20 minutes.

Operating Temperature: -10 ~10°C

10°C ~ 30°C (≤80% RH),

30°C ~ 40°C (≤75% RH),

40°C ~ 50°C (≤45%RH)

Storage Temperature:

-20°C to 60°C, 0 to 80% R.H. (baeries not ed)

Temperature Coecient:

0.15 x (Spec.Accy) / °C, < 18°C or > 28°C .

Measure: Samples 3 mes per second .

Altude: 6561.7  (2000m)

Safety: Complies with EN61010

CAT.IV. 600V, CAT.III. 1000V

CAT Applicaon eld

I The circuits not connected to mains.

II The circuits directly connected to Low-voltage installaon.

III The building installaon.

IV The source of the Low-voltage installaon.

Weight: 460g (including battery)

Dimensions (W x H x D): 94mm x 190mm x 48mm with holster. Accessories:

Battery (installed), Test leads and user manual.

(The probe assembly provided with the product are for use with this product)

Pollution degree: 2

EMC: EN 61326-1

Shock vibration: Sinusoidal vibration per MIL-PRF- 28800F (5 ~ 55 Hz, 3g max.)

Drop Protection: 4 feet drop to hardwood on concrete floor.

Indoor

Use.

Summary of content (12 pages)

PAGE 1
AC+DC True RMS Industrial Multimeter RND 355-00002 Features • • • • • • • • • • • • • • • • • • 6000 count digital display. 62 segment bar graph . Extra Large scale display and white backlit True RMS 0.
PAGE 2
AC+DC True RMS Industrial Multimeter RND 355-00002 Electrical Specifications Accuracy is ±(% reading + number of digits) at 23°C ± 5°C < 80%RH. AC Function ACV and ACA specifications are ac coupled, true R.M.S. The crest factor may be up to 3.0 as 4000 counts. For non-sinusoidal waveforms, Additional Accuracy by Crest Factor (C.F.): Add 3.0% for C.F. 1.0 ~ 2.0. Add 5.0% for C.F. 2.0 ~ 2.5. Add 7.0% for C.F. 2.5 ~ 3.0. (1) DC mV Voltage Range Resolution Accuracy 60.00 mVDC 0.01 mV ± (0.08% + 5d) 600.
PAGE 3
AC+DC True RMS Industrial Multimeter RND 355-00002 (5) 5) mA Current Range Resolution Accuracy 60.00 mADC 0.01 mA ± (0.8% + 3d) 600.0 mADC 0.1 mA ± (0.8% + 3d) 60.00 mAAC 0.01 mA ± (1.2% + 3d) 600.0 mAAC 0.1 mA ± (1.2% + 3d) Maximum measurement time: 10 minutes at 600 mA with at least 20 minutes rest time. AC Frequency Response: 45 ~ 1 kHz (Sine Wave) Overload Protection: AC/DC 440 mA (6) 6) A Current Range Resolution Accuracy 6.000 ADC 0.001 A ± (0.8% + 3d) 10.00 ADC 0.01 A ± (0.
PAGE 4
AC+DC True RMS Industrial Multimeter RND 355-00002 (10) 10) Diode Test Range Resolution Accuracy 1.500 V 1 mV ± (1.5% + 2d) Open Circuit Voltage: Approx. 1.8 V Overload Protection: AC/DC 1000 V. (11) 11) Capacitance Range Resolution Accuracy 1.000 μF 0.001 μF ± (1.2% + 5d) 10.00 μF 0.01 μF ± (1.2% + 2d) 100.0 μF 0.1 μF ± (1.2% + 2d) 1.000 mF 0.001 mF ± (1.2% + 2d) 10.00 mF 0.01 mF ± (1.2% + 2d) Overload Protection: AC/DC 1000 V.
PAGE 5
AC+DC True RMS Industrial Multimeter RND 355-00002 (14) 1 AC+DC Voltage Range Resolution Accuracy 6.000 V 0.001 V ± (2% + 5d) 60.00 V 0.01 V ± (2% + 5d) 600.0 V 0.1 V ± (2% + 5d) 1000 V 1V ± (2% + 5d) Additional specification are same as voltage function. (15) 1 AC+DC mV Range Resolution Accuracy 60.00 mV 0.01 mV ± (2% + 5d) 600.0 mV 0.1 mV ± (2% + 5d) Additional specification are same as mV voltage function. (16) 1 AC+DC mA Range Resolution Accuracy 60.00 mA 0.
PAGE 6
Primary Lithium Battery RND 305-00004E 1. Scope: This specification is applicable to RND 305-00004E. 2. Law & Regulation Compliances: This product complies with EU’s battery directive (2006/66/EC). Packaging materials comply with EU’s directive on packaging materials and waste (94/62/EC) 3. General: 3.1 Type Designation CR-V9 3.2 Chemical System: Lithium/Manganese Dioxide (Li/MnO2) 3.3 Nominal Voltage: 9 V 3.4 Weight: Approximate 34g 3.5 Shape and Dimension (mm): See figure-1 3.
PAGE 7
Primary Lithium Battery RND 305-00004E 4.1 Open circuit voltage and closed circuit voltage (Load resistance 150Ω, 0.3s) OCV(V) CCV(V) Min 9.3 8.7 Normal 10.2 10.05 Min 9.3 8.7 Normal 10.2 10.05 / Initial Stored 1 year 4.2 Service Output Background: a 10 000 Pulse:620 24h 1 s per h Load 600Ω 270Ω 620Ω Test mode 24h/d 1h/d 2h/d end voltage 5.4V 7.8V 7.8V 7.8V Unit hour hour hour day M.A.D 54 20.5 47 36 Normal 58 22.5 51 39 M.A.D 53.5 20.2 46.5 35.
PAGE 8
Primary Lithium Battery RND 305-00004E 5.4 Drop Test The batteries should withstand three drops from 75cm in any orientation onto an oak board. Open circuit voltage should be kept over 9.3V. Closed circuit voltage should be kept over 8.7V. 5.5 Temperature Cycling Test Store the cells in the temperature chamber at temperature cycling for 10 cycles, any defects should not be observed in appearance and dimensions. 60℃ -10℃ 1h 1h 1h 1h 1 cycle 5.
PAGE 9
Primary Lithium Battery RND 305-00004E RND is a trademark of Distrelec
PAGE 10
Primary Lithium Battery RND 305-00004E 9. Precautions in Handling of Lithium Batteries: Lithium batteries contain lithium metal, organic solvents and other reactive materials, which are combustible. Care must be exercised when handling Lithium batteries to ensure that short circuiting, puncturing or deformation does not occur which may result in heat generation, leakage, explosion or possibility a fire which might cause injury.
PAGE 11
Primary Lithium Battery RND 305-00004E 10.13 Keep batteries out of the reach of children Especially keep batteries which are considered swallowable out of the reach of children. In case of ingestion of a cell or battery, seek medical assistance promptly. Chart1.Discharge diagram 270Ω, 1h/d e.v. =7.8V 270Ω 1h/d e.v.=7.8V 620Ω 2h/d e.v.=7.8V hour 620Ω, 2h/d e.v. =7.
PAGE 12
Primary Lithium Battery RND 305-00004E Figure-1 SHAPE AND DINENSION Unit：mm RND is a trademark of Distrelec