Datasheet

FOLLOWING CONNECTORS WITH CABLES ARE APPLICABLE FOR TESTING:
1. RJ-45 plug - Shielded (STP) or Non-shielded (UTP).
2. RJ-11 plug - 6P telephone plug.
3. USB plug - USB type A to USB type B.
4. BNC - To test the terminatorvalue.
OPERATION INSTRUCTIONS:
1. Connect one side of the plug to the main Tester Unit and the other side of plug
to Remote Unit.
2. Press the Push Buon on Main Tester Unit.
3. Read the status shown on LED’s displays.
-2-
LED display area
Test buon
Remote
module
USB jack (Type A)
RJ-11 jack
RJ-45 jack
USB jack (Type B)
RJ-11
(Phone System)
RJ-45
(Networking)
BNC connector
(10BASE-2,
10BASE-5)
Master unit