Datasheet

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Reverse Standoff Voltage: 5.0 to 170 V Peak Pulse Power: 1500 W
FEATURES
MECHANICAL
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at T
A
= 25℃ ambient temperature unless otherwise specified.
NOTE: 1.Non-repetitive current pulse, per Fig.3 and derated above T
A
=25℃ per Fig.2
2.Mounted on 5.0mm copper pads to each terminal
3.Measured on 8.3ms single half sine-wine. For uni-directional devices only.
4.VF=3.5V on SMC-5.0 thru SMC-90 devices and VF=5.0V on SMC-100 thru SMC-170 devices
PARAMETER
SYMBOLS VALUE UNITS
Peak pulse power dissipation with a 10/1000µs waveform(NOTE 1,2,FIG.1)
P
PPM
(Min) 1500 W
Peak forward surge current (Note 1,2,3) I
FSM
100.0 A
Peak pulse current with a 10/1000µs waveform (NOTE 1) I
PPM
See Table 1 A
Maximum instantaneous forward voltage at 50A(Note 3,4) unidirectional only V
F
3.5/5.0 V
Operating junction and storage temperature range T
STG
,T
J
-55 to + 150
℃
PIN DESCRIPTION
1 Cathode
2 Anode
PINNING
SMC
• Uni-directional and Bi-directional versions available
• Ideal for ESD protection of data lines in accordance
with IEC1000-4-4(IEC801-2)
• Glass passivated die construction
• Low incremental surge resistance
• Excellent clamping capability
• Fast response time
• Case: SMC molded plastic body
• Terminals: solderable per MIL-STD-750, method 2026
• Polarity indicator: cathode band(uni-directional only)
• Weight: 0.25 grams
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com