Datasheet

Ceramic Disk Capacitors
Temperature = Lower than 40℃
Humidity = Lower than 70% R.H.
2. After opening the package, please store in desiccators.
Item Temperature Compensating Measuring Condition
Strength of
termination
Termination not to be broken or loosened
Force：2 LB min.
Keep time：10  1 sec.
Solderability of leads
Lead wire to be soldered vertically up to
the
coating end point.
At least 75% of lead surface is covered
Solder temperature：260  5℃
Dipping：2  0.5 sec.
(Flux shall be used)
Material List
Storage
1. The storage conditions should be:
Environmental and Test Characteristics
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com