Datasheet

SPECIFICATION & TEST METHODS
1.SCOPE
This specification applies to film capacitors of following type. Used
in electronic equipment.
2. PRODUCT NAME
Metallized Polyester film capacitor
3.CONSTRUCTION
(Dimensions and materials)
Dimensions
:
Refer to dimensions drawing
Materials
1.Element
: Metallized Polyester film.
2.
Metal spray
: Special solder (Lead free)
3.
Lead wire
: Tinner copper clade steel wire (Lead free)
4.
5.
Inner coating: Epoxy
resin (UL-94V-0
Standard)
Outer case: Plastic case (UL-94-V-0 Standard)
4.CHARACTERISTICS
Standard atmospheric condtions.
Unless otherwise
specified, the standard
range of atmospheric conditions for making
measurements and tests is as follows:
Ambient temperature : 15 to 35 °C
Relative humidity : 45 to 85 % Air
Pressure : 86 to 106 kpa
If there may be any doubt on the results, measurements shall be made within the following limits.
Ambient temperature : 20±5 °C
Relative humidity : 60 to 70 %
Operating temperature range : -40 to +105 °C
Operating temperature range is the range of ambient temperature for which the capacitor
can be operated continuously at rated voltage.
Distrelec Group AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com