Datasheet

‧Miniature product, 105
℃
‧Applicable to small electronic devices
‧Height: 7 mm
‧RoHS Compliance
Items Characteristics
Capacitance Tolerance
±
20%(120Hz﹐20℃)
Operating Temperature Range
-40 ~ +105℃
Rated Voltage Range
6.3 ~ 50VDC
Leakage Current
I ≦ 0.01CV or 3 (µA) which is greater.( After 2 minutes application of DC rated voltage, at 20 ℃)
Dissipation Factor
(tan δ)
Measurement Frequency: 120Hz. Temperature: 20℃
Rated Voltage(V) 6.3 10 16 25 35 50
tan δ(Max) 0.24 0.20 0.16 0.15 0.12 0.10
Low Temperature Stability
Impedance Ratio(Max)
Measurement Frequency: 120Hz.
Rated Voltage(V) 6.3 10 16 25 35 50
Z(-25℃) ∕ Z(20℃) 3 2 2 2 2 2
Z(-40℃) ∕ Z(20℃) 6 5 4 3 3 3
Load Life
1000hours,with application of rated voltage at 105℃
Capacitance Change Within ± 20% of Initial Value
tan δ 200% or less of Initial Speci󰘰ed Value
Leakage Current Initial Speci󰘰ed Value or less
Shelf Life
The following speci󰘰cations shall be satis󰘰ed when the capacitors are restored to 20℃ after
exposing them for 1,000 hours 105℃ without voltage applied. Before the measurement, the
capacitor shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4.
Capacitance Change Within ± 20% of Initial Value
tan δ 200% or less of Initial Speci󰘰ed Value
Leakage Current Initial Speci󰘰ed Value or less
Standards
JIS C 5101-4 (IEC 60384)
Frequency Coefficient of Permissible Ripple Current
Capacitance (μF)
Frequency (Hz)
50 120 1K
≧
10K
＜
100 0.80 1.00 1.30 1.50
≧
100 0.80 1.00 1.15 1.20
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5
℃
rise.
When long life performance is required in actual use , the rms ripple current has to be reduced.
Aluminum Electrolytic Capacitors
Features
Specifications
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com