Datasheet

Appearance
Shall be no remarkable change
Withstand Voltage
Shall satisfy NO.3.1
Capacitance Change Rate
Within ±5% of the value before test
5.1 Temperature
Cycle
Dissipation Factor @ 1KHz: 0.002 (0.2%) max.
Test Temperature Cycle: Total 5 cycles.
Each cycle includes
1.
20 ± 2 °C for 3 min.
2.
-40 ± 3 °C for 30 min.
3.
+20 ± 2 °C for 3 min.
Insulation Resistance
≥50% of the limit value of NO.3.4
4.+110 ± 2 °C for 30min.
5.
+20 ± 2 °C for 3 min.
Appearance
Shall be no remarkable change
Withstand
Voltage
Shall satisfy NO.3.1
Capacitance Change Rate Within ±5% of the value before test
5.2 Dry Heat
Resistan
ce
Test Temperature: +110 ± 2 °C
Test Duration: 16 + 1/-0 hrs.
Dissipation Factor
@ 1KHz: 0.002 (0.2%) max.
Insulation Resistance
≥50% of the limit value of NO.3.4
Appearance
Shall be no remarkable change
Withstand
Voltage
Shall satisfy NO.3.1
Capacitance Change Rate Within ±5% of the value before test
5.3 Cold
Resistance
Test Temperature: -40 ± 3 °C
Test Duration: 2 ± 1 hrs.
Dissipation Factor @ 1KHz: 0.002 (0.2%) max.
Insulation Resistance
≥50% of the limit value of NO.3.4
5. ENDURANCE CHARACTERISTICS
5.4 Damp Heat
Appearance
Shall be no remarkable change
Withstand Voltage
Shall satisfy NO.3.1
Capacitance Change Rate Within ±5% of the value before test
Dissipation Factor @ 1KHz: 0.002 (0.2%) max.
Insulation Resistance
≥50% of the limit value of NO.3.4
Test Temperature: +40 ± 2 °C.
Test Humidity: 90% to 95% R.H.
Test Duration: 56 days.
After test, allow it stay alone for 1.5 ± 0.5 hrs.
at ordinary condition before making
measurements.
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com