Datasheet

No.
Test item
Performance
Test method (refer to IEC60384-14 )
7
Resistance to solder heat
There should be no visible
damage, ΔC/C<±5%
Ref 4.4 clause
Tb , method 1A
Solder temperature 260±5℃
Immersion time：10±1sec
8
Solvent resistance of
the marking
The marking should be
legible.
Ref 4.20 clause
Solvent :Industrial isopropanal
Use absorbent cotton wool
Initial measurement
Capacitance, Tanδ
Rapid change of
temperature
There should be no visible
damage.
Ref 4.6 clause
θ
A
=-40℃, θ
B
=-+110℃
Duration=30min
Vibration
There should be no visible
damage.
Ref 4.7 clause
Amplitude 0.75mm or acceleration 0.98m/s
2
,(whichever is the smaller values)
10~500HZ
2h each direction, total 6h
9
Bump
There should be no visible
damage, ΔC/C<±5%
Ref 4.8 clause
4000 times ,acceleration 390m/s
2
Pulse duration 6ms
Metallized Polypropylene Film
Interference Suppression Capacitors
2. Technical Specification
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com